INTI CUBE

Construction:

Built in 2005 by Wally Europe in Fano, Italy, with exterior and interior design by Luca Bassani, her fortitude is augmented through effortless operation, featuring an in-furling boom and a self-tacking, furling jib. This yacht boasts a sleek profile with flush decks, where all main halyards and sheets are neatly concealed beneath the deck, ensuring both a clean aesthetic and efficient functionality.

Accommodation:

Sleeps 6 in 3 cabins + 3 heads. The master cabin is equipped with two queen-sized beds, an office, and an en-suite bathroom. The second guest cabin has two twin beds and an en-suite. The third cabin has a Pullman bed and an en-suite bathroom.

Machinery:

• 250HP Cummins diesel engine [new 2024]
• Engine hours: 0 hrs
• Cummins Onan 22.5 KV generator [new 2024]
• Maximum Speed: 12 kts
• Fuel Tanks: 1,800 Ltrs in a carbon tank
• Water Tanks: 1,200 Ltrs in a carbon tank

Spars and Rigging:

• In-furling boom Carbon Fibre
• 4 Lewmar 111

Sails:

• One Sails Mainsail [2016]
• One Sails Genoa [2016]
• One Sails furling Gennaker [2016]
• Wally 94 INTI cube
• North Sails Genoa [2015]
• Trysail
• Storm Jib

Navigation:

• Raymarine AIS 50
• 2 x fixed VHF
• Satel
• 2 x MX GPS receivers
• 3 x Raymarine hybrid touch Chartplotter
• Navtex
• Standard C
• B and G Hercules 3000: 7 x FFD
• 8 x Analogues, 4 x 20/20
• 1 x Autopilot

Domestic Equipment:

• 200Ltrs Gianneschi boiler
• Gianneschi Hot water circulation
• Condaria air conditioning [new 2012]
• Tecnicomar watermaker
• Frigomar fridge-freezer [3 x units in the galley]
• Frigomar drinks fridge
• Techimpex oven [2016]
• Siemens microwave
• Sonos HI-FI
• Washer machine Samsung [2016]
• Dishwasher Bosch [2017]

Tender:

• 3.6M Zodiac Tender complete with a 15 Yamaha Outboard

Construction work 23/24

• Five-year overhaul of rigging, change of fittings of pockets and spreaders, combo of high and lower stays
• Replacement of bow pulpits
• Revision of tonnages plus adding of relaix
• Replacement of fridge pumps
• Furling overhaul
• Vang review
• Oil-dynamic refurbishment pedestal
• Hydraulic emergency stop button
• New external mattresses plus cockpit
• New dodger
• Inspection of black water tanks, washing and replacement of fittings
• Replacement of WC macerators
• Replacement of sea catch baskets
• Replacement of 7 sea caps
• New engine
• Complete generator overhaul
• Complete inverter overhaul
• New propeller axis
• Engine room painting
• Replacement of Tubomagic trim
• Replacement of the diesel transfer pump
• Overhaul of all pumps
• Overhaul of bilge pumps
• Fire pump overhaul
• Autoclave overhaul
• Daily tank disassembly, cleaning, fitting change
• New control unit, diaphragm holder, watermaking diaphragm
• New Catelcos
• New bathroom extraction blower for left bank
• New inverter compartment insulation
• Update cabin extinguishers (new)
• Replacement of condensate drain hoses for Frifo Funcoil

Site works 21/22

• Restoration of bathroom extraction pipes on right/left walls
• Change oven/hob Techimpex
• New blast chiller
• New refrigerator sensors plus fridge/freezer doors
• Sanisplit replacement
• Repainting lazzaretto
• Tuga glass rubbering
• Renovation in the worn points
• Chain change
• Barbotin review
• Tightening of electrical panels for RINA class
• Replacement of the 380 V dock transformer
• New washer/dryer
• New horn
• New oil-dynamic cooling exchanger
• Replacement of 3 hydraulic PLC cards
• Overhaul of the bow sheet piston
• Revision of the jib halyard piston
• New watermaking low pressure pump
• New A/C sea pump

Site works 19/20

• Replacement of on-board instruments and rewiring
• AIS and radar replacement
• Replacement of on-board computer
• Repainting/lamination of bubble on the left bow
• Reconsolidation of the knee of the extreme bow valve
• Lamination/painting gelcoat tender hull
• Boom light replacements
• Lopolight navigation replacement
• Construction of stern turrets (references) for maneuvering
• External display door construction
• Replacement of the mainsail
• Overhaul of engine room pumps
• Painting of woods
• Replacement of watermain membranes
• Painting sail lock
• Engine/generator override activation
• Painting of transom
• Removal of the rudder
• Revision of rudder bushings (high and low)
• New base sail
• New staysay
• New staysay sheets
• New blocks/equipelight
• Repainting of bottle protections/cable glands
• PTO clutch bearings
• Replacement of PTO connectors (Centaflex)
• Backstay pistons review

Site works 18/19

• Repainting of walls
• Teak finishing
• Replacement of damaged slats
• Cockpit/cockpit tires
• Replaced Tesa base slides
• Toggle Poistone staysay
• Staysay
• Steering wheels
• 2x Gennaker halyard pulleys
• Left jib halyard pulley
• Mainship pulley
• Jib sheet pulley
• Main halyard
• Jib halyard on piston
• Amantiglio
• New scores
• New textile brakes
• Diesel tank cleaning inspection
• Dinette fridge for inspection/insulation/condensate collection
• Revision 7 A/C funcoil
• New air delivery hoses
• Slider
• Air filters
• Manifold baser shaft
• Magic trim review
• Revision of the staysay piston
• Sheet piston overhaul
• Revision of the jib halyard piston
• Tesabase review
• Wind station connectors
• New batteries services/lights/electronics
• Overhaul of A/C pumps, autoclave, low pressure watermaker, refrigerator pumps, oil cooling
• Replacement of black water pipes

Site works 17/18

• Renovation of teak deck
• Complete painting of hull boom mast
• Construction of new guest cabin
• Complete engine overhaul
• Complete generator overhaul
• Complete A/C overhaul
• Engine room painting
• New fridge system
• Pumps overhaul
• Engine room recabling
• Replacement of engine room pipes
• PTO replacement
• New muffler separator
• New Sat Tel
• New TV antenna
• New touch screen crew
• New service inverter/fridge
• Painting paioli