Whether you are buying or selling, or planning your next charter, our dedicated team of professionals is at your service. We will reply to your inquiry as quickly as possible.
MAHALIA
€ 675,156About
Specifications
FRIENDSHIP YACHTS
2009
40' (12.19m)
3.91m
7 Knots Knots
8 Knots Knots
USA
Volvo 2017 40hp
Fiberglass
4
Descriptions
MAHALIA
Mahalia has been on fresh water for the past 12 seasons. She has been maintained by a professional team and stored in a heated warehouse off season for 7 months each year.
ASKING PRICE $735,000 USD
Friendship 40, Hull No. 18
Absolute unrivaled quality is synonymous with the Friendship Yacht Company. Incorporating many elements from his large custom yachts, designer Ted Fontaine has created the FRIENDSHIP 40, a luxury daysailer whose concept has been imitated, but by no means equaled. Uniquely customized and exquisitely appointed, the Friendship 40 uses push-button sailing, all handled by one person. The size of the cockpit, normally found on a much larger yacht, creates the perfect venue for a cocktail cruise for 10 guests. The sailing version of a luxury picnic boat, MAHALIA brings a new sense of ease to a day at sea with unmatched elegance and style.
Details
LOA: 40’9”
LWL: 30’3”
Beam: 12’10”
Draft: 3’11” board up / 9’2” board down
Hull material: fiberglass
Hull form: centerboard
Hull designer: Ted Fontaine
Deck material: teak
Displacement: 22,500 lbs
Ballast: 9,500 lbs
Flag: USA
Location: Sister Bay, Wisconsin
Year: 2009
Mfg: Friendship Yachts, NZ
Model: Friendship 40
Type: daysailer, weekend cruiser
Rig: sloop
Cockpit: aft
Speed: 7-8 knots
Engine: Volvo 40 HP
Engine year: 2017 / 29 Hrs.
Fuel capacity: 33 gallons
Water capacity: 141 gallons
Sleeps: 4
Accommodations
MAHALIA’s elegantly crafted interior boasts glossy-varnished, raised-panel teak joinery, a tongue and groove ceiling with a satin painted finish, comfortable settees, a functional galley and full standing 6’4” headroom. She maintains an impressive spaciousness for a boat of her size. With an abundance of storage, galley amenities, custom dish locker and a pull-out trash bin, MAHALIA is the perfect venue for sunset cocktails or long weekend excursions. Share drinks at the drop leaf table, refresh yourself with a shower in the fully appointed head and get a good night’s sleep in the large double centerline berth.
MAHALIA has been described as the perfect boat for “8 to sail; 6 to eat; 2 to sleep.” While
MAHALIA is intended to accommodate a couple for an overnight, the settees are long and
wide to sleep additional friends or family. There is an interior/exterior audio system with
sat radio and iPod hook up. The galley incorporates a deep refrigerator, microwave, and
Keurig one-cup coffee and tea brewer. The head features fresh water, electric flushing
head, shower, and teak framed mirror.
On Deck
More than a day boat, Friendship 40 marries a classically sculpted profile with a highperformance shoal draft underbody. Her spacious, ergonomically perfect cockpit is surrounded by a wide teak coaming, framing an expansive seating area unrivaled in her class. The low-profile cabin top provides a full 360-degree sightline, which enables a clear view from her bow to her stern.
Wide side decks and spacious fore and aft decks give MAHALIA a feeling of a much
larger boat than a 40.
MAHALIA’S cockpit features a Garmin 5208 touch screen color chart plotter with radar overlay (mounted at helm in a custom stainless-steel housing), Simrad auto pilot, two recessed B&G full function displays and two additional B&G analog displays. The GPS unit has satellite weather, radio, iPod, and can take 3D G2 chart cards. On either side of the wheel are control buttons for the electric jib furler, and at the helmsman’s feet are foot buttons for the bow thruster and mainsheet trim. Helm station also has recessed mounts for engine panels, hydraulic panel, auto pilot control, and wired remote for stereo system. The drop leaf table houses storage compartments, glass and wine bottle holders, and an insulated compartment for cold drinks. MAHALIA is one of three Friendship 40’s to have removable lifelines installed, with boarding gates on both port and starboard sides.
Sail Handling
The hydraulic mainsheet system of the Friendship 40, controlled by two-foot buttons at the helm, brings new levels of ease to sailing. All sail handling is done using push buttons located within finger’s reach from the helm seat. A Reckman electric headsail furler effortlessly controls the jib using two-foot buttons at either side of the helm. The bow thruster is also controlled by two-foot buttons located at the base of the wheel.
The two secondary winches on the house top provide push button control of centerboard control, spinnaker halyard, back-up main halyard and preventer. All lines have flush, stainless steel lined bins for clutter-free storage. All four deck winches are stainless steel Lewmar two-speed electric.
The foredeck houses two flush lockers – to port is the swing out anchor system with Lewmar electric windlass and salt water wash down, to starboard is the chain locker with storage for swim ladder and dinghy outboard motor. The custom chocks in the caprail are larger on the foredeck than those aft to accommodate large mooring lines, and the cleats are flush to the deck when not in use. On centerline is an additional, extra strength pop-up padeye for hurricane tie down.
Aft deck – huge lazarette for storing fenders and dock lines, custom flag socket with bracket for propane
grill, stainless steel hydraulic backstay, and flush plate access to fresh water hot/cold deck shower.
Structural
Hull:
Composite construction using Airex foam in the topsides with solid laminate hull bottom using vinylester resin to minimize print-through. Reinforcements are hand laid, stitched and knitted multiaxial E glass fabrics with carbon fiber in high load areas. Bulkheads are marine-grade plywood laminated into the hull. All cores are fixed using vinylester adhesive.
Two molded custom consoles for hydraulics, sail controls and engine instruments.
Molded recessed sheer strake.
Finished with owner’s choice of standard Awl Grip marine paint colors.
Deck:
Composite construction using Airex foam with extra high-density core being used in way of all fittings. Reinforcements are hand laid, stitched and knitted multiaxial E glass fabrics with isothalic polyester resin.
Deck and Deck Hardware
Deck:
Natural teak. All vertical surfaces finished with glossy cream gelcoat, cabin house top in Awlgrip nonskid.
Cap Rail:
Varnished teak
Sheer strake:
Varnished teak
Anchor Locker:
Molded into foredeck with flush, hinged hatch top. Anchor roller, self launching, with 35
lb. Delta anchor, 60m of 6mm chain.
Saltwater anchor wash system in anchor locker.
Windlass:
Lewmar V2 electric stainless steel anchor windlass with two-foot buttons and a remote control.
Chocks:
Custom cast stainless steel: two quarter chocks, two midships chocks, two bow chocks big enough to accommodate bulky mooring lines.
Cleats:
Eight Attwood flush mounted retractable mooring cleats with 4-bolt bases.
Nosing:
Varnished teak
Ports:
Six custom fixed tinted glass elliptical ports in cabin trunk.
Winches:
Two electric Lewmar 2-speed self-tailing primary winches with 2.6:1/9:1 gear ratios and 48.6:1 power ratio.
Two electric Lewmar 2-speed self-tailing halyard/centerboard/mainsheet winches with 2.4:1/7.6:1 gear ratio and 44.8:1 power ratio.
All winch buttons are recessed stainless steel Antal hardware.
Two Lewmar lightweight 250mm lock-in handles with ball grips.
Hardware:
Antal winch buttons, radiused genoa T-track, genoa cars and sliders, organizers, screw-in pad eyes, stoppers, silver anodized sheaves.
Hatches:
Three custom-made, flush teak deck hatches: lazarette, foredeck, and anchor locker.
One custom stainless-steel hatch with glass over salon/forward cabin.
Varnished teak companionway sliding hatch with removable varnished teak drop boards with lockable clasp, and custom storage bins.
Four hinged stainless steel Manship hatches under cockpit settees, two for storage, two for engine access.
Ensign:
5’ varnished teak flag staff and 3’x 5’ US yacht ensign commissioning flag. Stainless steel
cap rail mounted flag socket with dinghy pulling ability.
Accessories:
Four custom 12” x 24” line bins for halyard/sheet tails and four custom drink holders in cockpit all with flush, polished stainless steel trim and lining.
Cockpit sole: Teak deck on cockpit sole with custom angled helmsman floor.
Sheet stoppers:
Mainsheet, centerboard, topping lift to starboard. Main halyard, main reefing line, MPS halyard to port. Using Antal sheet stoppers and passing through Antal triple deck block organizers.
Exterior
Trim:
Varnished teak cockpit coaming cap, 6” wide.
Varnished teak cabin top nosing.
Varnished teak cap rail.
Four varnished teak console tops.
Varnished teak framed companionway sliding top with stainless rails.
Varnished teak cockpit seat fiddles.
Seating:
Molded cockpit seats finished with cream gelcoat. Port and starboard facing settees in cockpit, forward facing settee behind steering wheel, all with double angle back rests for ergonomic comfort. All settees come with custom bottom and backrest cushions, 4” total thickness. All cushions upholstered in Perennials outdoor fabric.
Cockpit Table:
Custom varnished teak drop leaf table. Table houses bulkhead mounted compass, 12V outlet, varnished teak drink and bottle holders, and insulated, drained cold beverage box with custom varnished teak covers. Stainless steel legs.
Steering Wheel:
48” stainless steel wheel with stainless steel rim and elk hide cover.
Pedestal:
Classic steering pedestal with thru-shaft brake and custom stainless-steel housing for GPS.
Stowage:
Storage areas under port and starboard settees.
Two Stainless steel sheet rimmed bins one each port and starboard by helm.
Two Stainless steel sheet rimmed bins one each port and starboard by companionway for
halyard / sheet storage at base of each winch.
Scuppers:
Custom stainless-steel design, four in cockpit, four on deck, all with direct overboard
drainage.
Exterior Luxury Package:
Custom dodger with zip-out side curtains, recessed stainless steel tracks and elk hide
covered grabrail.
Stainless steel braided hoses for hydraulic backstay and vang
Custom flush stainless steel chafe plates in cockpit coaming for jib sheets
Lights at mid boom and boom end with dimmer switches
Varnished teak wine bottle and glass holders on underside of cockpit table lids.
Hand-held freshwater shower on aft deck with flush plate and hot/cold mixer tap.
Stainless steel folding swim ladder
Bug screens for main salon hatch and companionway
Foghorn mounted under radar dome with on/off/auto switch at helm.
Interior
Interior Finish:
Gloss varnished teak veneer finish on fore and aft joinery. Hull ceilings painted white vgroove. Athwartship bulkheads in painted white v-groove varnished teak and painted white raised panel on forward bulkhead. Solid teak with gloss finish for interior trim, locker door and drawer frames and corner posts.
Overhead:
Painted white v-groove overhead.
Soles:
Natural teak with black resin inlay.
Locker Doors:
Framed edges with solid flat fielded panel teak with gloss finish varnish.
Drawers:
Solid beaded flat panel teak with lift and pull drawer slides and custom cast bin pulls.
Table:
Solid teak drop leaf table in main salon with drawers on aft end.
Countertops:
Azure Corian with radiused edges at facia and teak fiddles.
Sinks:
Stainless steel under-mount sink in galley, under-mount ceramic sink in head.
Faucets:
Perrin and Rowe wall-mount faucet in galley and Grohe cross-handle mixer tap in head.
Shower:
Grohe hand-held shower unit mounted on head bulkhead.
Drainage:
Head sole natural teak and black resin with edge drain to sump and direct overboard
discharge pump.
Fixtures:
Towel bar, soap dish, toilet paper holder, toilet brush, and tumbler holder.
Microwave:
Sharp microwave mounted on teak shelf in galley locker.
Coffee Maker:
Keurig one-cup brewing machine on pull-out shelf in galley locker.
Refrigerator:
Custom stainless steel lined fridge box recessed in galley countertop with removable
plexiglass shelving.
Berths:
Double berth forward with 5” thick cushion.
Settees used as additional berths. Stowage shelves and lockers above settees with teak fiddles.
Fabric:
All upholstery Perennials outdoor fabric. Includes cockpit settee cushions and backrests, main salon cushions, zip-on bed cover and pillow shams, 5 throw pillows.
Interior Luxury Package:
Gloss varnished teak or painted white v-groove bulkheads.
Raised and fielded panels on all drawers and doors
Drawers in salon table with dividers for silverware
Pull-out shelf for coffee maker
Pull-out shelves for custom dish storage
Custom fabricated oversized trash bin in lower galley locker
Overhead locker doors for extra storage in galley and head
Teak carcasses in head
Teak framed mirror in head
Custom canvas padded mast wrap
Mechanical
Engine:
Volvo 40 HP 4-stroke sail drive engine, new in 2022 with only 29 hours of use. Fresh
water cooling, Racor filter, and heavy duty 135-amp alternator. Oil change pump
included on engine.
Bow thruster:
Lewmar 6kw tunnel thruster, controlled by foot buttons at helm.
Air conditioner:
Marine Air Cruisair elite, 12000 BTU
Gauges:
Custom stainless steel recessed engine instrument panel with Volvo gauges for tachometer, oil pressure, fuel level, freshwater levels.
Gearshift:
Morse type single-control gearshift and throttle near helmsman.
Fuel Tank:
33 gallon welded translucent polyethylene fuel tank with inspection/clean-out port located under cockpit sole and gauge on instrument panel.
Filter:
Racor fuel filter.
Vents:
Vent line with Racor LG100 vent spillage filters.
Steering:
Whitlock drag and link steering system.
Rudder:
Balanced, elliptical spade rudder constructed with uni-directional glass rovings and 4” diameter carbon fiber shaft with roller type rudder bearings.
Bilge Pumps:
Two 12V automatic Jabsco bilge pumps and one cockpit operated Whale manual pump.
Electrical
House Batteries:
Four 8G8D Endurant 12V DC batteries, 840 Amp hours total.
Starting Battery:
12V DC 650 CCA Endurant battery.
Distribution:
Custom DC backlit panel with circuit breakers and battery condition meter and 110V
panel installed for optional generator.
Alternators:
Engine supplied standard alternator to charge starting bank, additional Leece-Neville 12V DC 130-amp alternator supplied to charge house bank.
Shore Power:
125V / 30-amp shore power connection in cockpit with 50’ cord.
Battery Switch:
Battery bank switch with DC main breaker.
Inverter:
12V DC / 120V AC, 2000W, Xantrex inverter to be switched on the main AC electrical
panel. Inverter shall power microwave and 110V outlets.
Interior Lights: Four reading lights, five dome lights, courtesy lights at forward and aft end of salon table.
Centerline dome light with red/white selection switch.
Engine room will have utility lights.
Exterior Lights:
Masthead tricolor and anchor, bow, stern, spreaders, foredeck, and two boom lights.
12V Outlets: One 12V plug located in cockpit for search light use.
110V Outlets:
Five 110V plugs: galley, head, forward cabin, starboard side salon, and engine room.
Audio Package:
Clarion CMD5 radio/CD player, with iPod holder and hook up, satellite radio, Pioneer
speakers in salon and exterior Nautica speakers in cockpit. Wired remote is located at helm.
Plumbing
Water system:
Hot and cold pressure water system to galley, head, shower.
Water Tank:
140 gallons of water capacity in three independently valved tanks (third tank set on
stringers for future generator).
Water pump:
Jabsco FloJet self-priming water pump.
Water Heater:
Force 10, 6-gallon tank powered by AC electrical heating element and from re-circulating through the main engine.
Toilet:
Tecma Silence Short electric freshwater toilet with overboard/holding tank discharge.
Holding tank with overboard drain/pump out discharge.
Bilge Pump:
One automatic 12V DC bilge pump mounted in the engine room. The pump will
discharge overboard at the waterline with vented loops. One manual Whale bilge pump operated from the cockpit.
Sump Pump:
One automatic 12V DC bilge pump with direct overboard discharge.
Thru-hulls:
Forespar flush-mounted sea cocks below the waterline for engine, head, and galley with double-clamped hoses.
Spars, Rigging and Sail Handling
Mast:
Aluminum mast, Awlgrip finish with two sets of airfoil spreaders, steaming light, internal masthead wire conduit, stainless steel gooseneck, vang lugs, and halyard attachment step.
Mainsail track for fully battened mainsail. Two flag halyards to lower spreaders.
Boom:
Aluminum boom with fittings for single reef lines, vang lug, and topping lift/mainsheet bale. One light at mid-boom and one at boom end with dimmer switches.
Mast Collar:
Custom stainless steel mast collar with integral turning blocks for all lines.
Standing Rig:
Rod rigging with Navtec turnbuckles and stainless-steel covers.
Running Rig:
12mm braided main halyard, 10mm braided genoa halyard with eye splice to shackle to furler swivel. 12mm braided genoa sheet.
Stainless steel genoa halyard adjustment on mast track.
Chain Plates:
Custom stainless-steel chainplates, stem head, and backstay tang.
Boom Vang:
Polished stainless steel hydraulic Navtec vang.
Backstay:
Polished stainless steel hydraulic Navtec backstay.
Mainsheet:
Hydraulic mainsheet trim, controlled by buttons at helmsman’s feet.
Furler:
Reckmann EF90 silver series electric genoa furler controlled by foot buttons at helm.
Genoa Tracks:
Two 5’ x 1.25” Antal stainless steel T-tracks with two genoa lead blocks
Navigation
Compass:
Stainless steel constellation binnacle compass with red LED.
B&Gs:
Two B&G Hydra 3000 graphic function displays with masthead wind sensor and depth, speed, and temperature transducers and two B&G analogs for magnified wind and 360- degree wind.
GPS:
Garmin 5208 touch screen system with plotter located at helm.
Radar:
Garmin 18” dome painted to match rig, radar overlay on GPS plotter.
VHF:
One Icom IC-M504 VHF radio located in electrical locker.
Paint and Finish
Hull:
Awlgrip, blend of Flag and Aristo blue.
Deck:
Cream gelcoat and Moondust nonskid.
Bottom:
Epoxy primed, dark red anti-fouling paint.
Boot Stripe:
Single stripe, Awlgrip Matterhorn white.
Cove Stripe:
Molded, painted with light gold.
Exterior Teak:
Minimum of nine coats gloss finish varnish.
Interior Teak:
Gloss varnish.
Boat Name:
Name and hail port painted on transom.
Outfitting
Four leather and lambskin fender holders custom fit for cap rail.
Three Aere Docking Systems inflatable 12” boat fenders with fabric covers.
Four 40’ double braid dock lines.
Four 8” x 20” fenders with double braid lines and black fleece covers.
Two custom made spruce fender boards.
Stainless steel bars in foredeck hatch and cockpit hatch for hanging spare lines.
False bottom in aft cockpit locker for easy storage.
Boat hook mounted in foredeck hatch.
Four adult and two child life jackets.
Four fire extinguishers mounted throughout the boat.
EPIRB mounted in lazarette.
Flare kit with storage box.
Hose, bucket, deck brushes and all cleaning supplies.
Whipping kit with storage bag.
One engine spares kit and metric tool kit with necessities provided.
Canvas Work
Custom padded cockpit table cover
Custom padded helm cover
Cockpit cover – custom tent that attaches to underside of boom for full cockpit protection.
Sails
North Sails Norlam 7 oz. mainsail with traditional battens.
North Sails Norlam 7 oz. 110% genoa.
North Sails Code-0 downwind sail with snuffer.
Documentation
Friendship 40 Owner’s Manual, all equipment manuals, construction drawings and all systems schematics.